Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout





 

Home » All Products

 Checkout
Motor Case
Product ID: 1009

Details 

Motor Storage case holds 10 "540 size" motors and even has a plastic storage box for pinions and spare parts. Motor pockets are 50mm long x 34m wide with a slit for the motor shaft. Case dimensions are 14"L x 10.5"W x 3.5"H. These cases work great for lots of storage problems. This case is made of a HEAVY DUTY PLASTIC, no more flimsy bindings these cases are HINGED! There's even a hole to place a padlock on! PLEASE NOTE! Due to it's large size this item must be shipped in a medium size Priority flat rate box. For orders outside the U.S. please e-mail us for shipping costs.
Price: $19.99

Large Lipo Storage Safe
Product ID: 1020L

Details 

Store and charge your Lipo's in our large size heavy duty LIPO-SAFE! Measures 12" by 9" Lipo bags are required by ROAR and are highly recommended for storing your Lipo's especially when stored inside your home!
Price: $7.99

 
Product ID: 1029

Details 

30mm (1.18"") by 4 mil thick Clear shrink wrap. Price is per foot.
Price: $0.15

64mm wide Clear Shrink Wrap
Product ID: 1031

Details 

64mm (2.52") by 4 mil thick Clear shrink wrap. Price is per foot.
Price: $0.25

 
Product ID: 1033

Details 

54mm wide (2.1") by 5 Mil thick clear shrink wrap. Price is per foot.
Price: $0.21

Custom Battery Case
Product ID: 1100

Details 

Now you can build your own storage case. Simply choose between one of 4 insert options for the left and right side of this extra heavy duty case to create your own custom storage case. Storage case dimensions are approximately 14"L x 10.5"W x 3.5"H. This case is made of a HEAVY DUTY PLASTIC with durable hinges that won't break. There's even a hole to place a padlock on! To order choose one of the 4 insert options for each side of the case. For pictures of the inserts click on the picture and look at photo #'s 2 through 5 PLEASE NOTE! Due to it's large size this item must be shipped in a medium size Priority flat rate box. For orders outside the U.S. please e-mail us for shipping costs.
:
:
Price: $19.99
Out of Stock

45mm White Shrink Wrap
Product ID: 1430

Details 

45mm (1.77") by 5 mil thick White shrink wrap. Price is per foot.
Price: $0.18

48mm White Shrink Wrap
Product ID: 1431

Details 

48mm (1.89") by 5 mil thick White shrink wrap. Price is per foot.
Price: $0.19

56mm White Shrink Wrap
Product ID: 1432

Details 

56mm wide (2.2") by 5 Mil thick white shrink wrap. Price is per foot.
Price: $0.22

66mm White Shrink Wrap
Product ID: 1433

Details 

66mm (2.60") by 4 mil thick White shrink wrap. Price is per foot.
Price: $0.26

75mm White Shrink Wrap
Product ID: 1434

Details 

75mm (3"") by 4 mil thick White shrink wrap. Price is per foot.
Price: $0.30

92mm White Shrink Wrap
Product ID: 1435

Details 

92mm (3.62"") by 5 mil thick White shrink wrap. Price is per foot.
Price: $0.36

100mm White Shrink Wrap
Product ID: 1436

Details 

100mm (3.94"") by 4 mil thick White shrink wrap. Price is per foot.
Price: $0.39

114mm White Shrink Wrap
Product ID: 1437

Details 

114mm (4.49"") by 5 mil thick White shrink wrap. Price is per foot.
Price: $0.45

Custom 14 gauge "series" wire harness
Product ID: 1622

Details 

Now you can design your own custom 14 gauge wire "series" harness. Simply choose your first, second, and third plugs from the three drop down menus and then choose the length of the wires from the wire length drop down menu. We will then custom build the harness to your specs!

These harnesses are recommended for 1/18th, 1/12th, and light duty 10th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the voltage for increased speed.
:
:
:
:
Price: $4.49

Custom 14 gauge "parallel" wire harness
Product ID: 1623

Details 

Now you can design your own custom 14 gauge wire "parallel" harness. Simply choose your first, second, and third plugs from the three drop down menus and then choose the length of the wires from the wire length drop down menu. We will then custom build the harness to your specs!

These harnesses are recommended for 1/18th, 1/12th, and light duty 10th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the capacity for increased run time.
:
:
:
:
List Price: $9.99
Price: $4.99

Custom 12 gauge "parallel" wire harness
Product ID: 1624

Details 

Now you can design your own custom 12 gauge wire "Parallel" harness. Simply choose your first, second, and third plugs from the three drop down menus and then choose the length of the wires from the wire length drop down menu. We will then custom build the harness to your specs!

These harnesses are recommended for heavy duty 1/10th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the capacity for increased run time.
:
:
:
:
List Price: $9.99
Price: $4.99

Custom 12 gauge "series" wire harness
Product ID: 1625

Details 

Now you can design your own custom 12 gauge wire "series" harness. Simply choose your first, second, and third plugs from the three drop down menus and then choose the length of the wires from the wire length drop down menu. We will then custom build the harness to your specs!

These harnesses are recommended for medium to heavy duty 1/10th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the voltage for increased speed.
:
:
:
:
List Price: $9.99
Price: $4.99

Custom 10 gauge "parallel" wire harness
Product ID: 1626

Details 

10 gauge wire "parallel" harness. Because of the high power application this harness is designed for this wire harness is only available with EC5 plugs. Simply choose the length of the wires from the wire length drop down menu. We will then build the harness to your specs!

These harnesses are recommended for 1/8th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the capacity for increased run time.
:
List Price: $13.99
Price: $6.99

Custom 10 gauge "series" wire harness
Product ID: 1627

Details 

10 gauge wire "series" harness. Because of the high power application this harness is designed for this wire harness is only available with EC5 plugs. Simply choose the length of the wires from the wire length drop down menu. We will then build the harness to your specs!

These harnesses are recommended for 1/8th scale applications

Warning: Dual-battery operation requires knowledge of the vehicles speed control and vehicle limitations. Follow all precautions to assure proper performance of your vehicle and batteries. This harness will double the voltage for increased speed.
:
List Price: $13.99
Price: $6.99

1s 7000 mah 90c Hard Case Lipo Pack
Product ID: 1S700090C

Details 

Brand new (V9) Lipo's from IP. IP already sets the standard for Li-po performance and they just upped the ante once again. These packs have an incredible 90C constant 180C burst rate! Now with even more capacity at an amazing 7000 mah! Fantastic "up front" voltage to get to the head of the field! This pack can be charged at up to 5C. With all this performance the pack still maintains a very high level of durability! Pack comes with high current low profile 4mm banana plugs.

ROAR APPROVAL PENDING

Type: Lipo
Capacity: 7000mAh
Voltage: 3.7
No. of Cells: 1
Configuration: 1S2P
MAX Continuous
Discharge Rate:
90C
Weight 5.5oz 155grams
Dimensions:
93.3mm Length(ea) 47mm Width(ea) 19mm Height(ea)
List Price: $99.99
Price: $49.99

12 Gauge Wire Female Pigtail
Product ID: 2000

Details 

Design your own Female Pigtail from 1" to 6" in length with your choice of Female Plug!

Deans style ultra plug shown in picture.

:
:
Price: $1.99

12 Gauge Wire Male Pigtail
Product ID: 2001

Details 

Design your own Male Pigtail from 1" to 6" in length with your choice of Male Plug!

Traxxas high current style plug shown in picture.

:
:
Price: $1.99

Losi Style "Mini" Pigtail
Product ID: 2003

Details 

This Female Pigtail fits the Losi Mini-T and new Losi Mini Sprint vehicles that use the square white plug. Approximately 3" long leads.
Price: $0.99

2S 2300 mah LiFe transmitter Pack.
Product ID: 2S2300LF

Details 

Brand New! Pro-Match 2S 2300mAh LiFe transmitter Battery Pack. Perfect fit for the Futaba 4PK, 4PKS, and 4PL transmitters. Check dimension below for possible use with other transmitters. With proper care this pack will have a 1000+ usable cycles lifespan. These packs can be stored in a fully charged state with little power loss, and can be discharged deeper with less risk of damage to the cells. Most importantly, they are much safer than their Lipo counterparts! There is no risk of combustion! LiFe cells will not catch fire or explode when over charged, or after a deep discharge. Comes with 2 pin universal plug and XH balance plug. Please Note: Brand new LiFePO4 batteries need a break in period of about 15-20 cycles. They have been found to fail prematurely if they are deep discharged below 1/3 of the rated capacity during this break in period. We recommended that this battery not be charged at rates higher than 1C to maximize the lifespan of the battery. Also, LiFe batteries should not be discharged below 2.5V per cell to lessen the risk of pack failure and maximize pack life. We also recommend you REMOVE the batteries from your cars or radios when you are done, or at least unplug them to avoid accidental over discharge if the transmitter is left on. IMPORTANT: 1) You will need a LiFe specific charger to charge the pack (NiMH, NiCD or Li-Poly only chargers WILL NOT WORK!) 2) You must not discharge the LiFe battery pack below 33% capacity during the break in period or below 2.5V per cell after break in. 3) It is not recommended that you charge this LiFe battery pack at amp rates higher than 1C. 4) Read the instructions carefully before operating this battery. Features: •Safe chemistry will not explode or catch fire •More mAh per gram compared to NiMH cells, meaning lighter models, and longer run time •Virtually no "self discharge", so the battery is always ready to go even weeks after charging. •Superior voltage performance under load compared to NiMH cells, with consistent torque and speed.

Type: LiFe
Capacity: 2300mAh
Voltage: 6.6
No. of Cells: 2
Configuration: 2S
MAX Continuous
Discharge Rate:
5C
Weight 3.8oz./107grams
Dimensions:
88mm L 43mm W 15mm H
Price: $26.99

2S 2300 mah Square Nitro Receiver Lipo Pack
Product ID: 2S2300SQ

Details 

New! IP 2S 2300 mAh 10C square style receiver battery pack has a semi hard plastic sleeve to help reduce the chance of crash damage. Made with super thick 20awg silicone wire and your choice of a red 2 pin JSt plug (shown in photo) or a black universal style plug (see flat pack photo shown above). This light weight Li-Poly battery is designed to power the electronics of most 1/10th or 1/8th scale nitro powered race cars using a "square" style receiver pack. The weight of your race car will be significantly reduced over the typical NiMh receiver packs. The battery voltage to your receiver and servos will remain constant throughout the race. Due to the higher voltage of A Lipo battery, a voltage regulator may be required.
Why must Li-Poly receiver packs be used with a voltage regulator? Although the Li-Poly battery pack’s nominal voltage is 7.4V, when it is fully charged the voltage output is 8.4V. The 8.4V output exceeds the safety level of many receivers and servos on the market, so it is YOUR responsibility to check with the radio and servo manufacturer(s) to make sure you do not need a voltage regulator with these Li-Po receiver packs!
IMPORTANT: 1) Use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) 2) Do not over discharge the Li-Poly battery pack! 3) Read all instructions carefully before using this battery.
Specifications:
* Connector: JR Style with thick 20AWG Silicone Wire
* Balancer Plug: XH style
* Recommended Application: 1/10th & 1/8th scale vehicles that normally use a 5 cell "square" style receiver battery. Please check the dimensions of your battery compartment to verify that this pack will fit.

Type: Lipo
Capacity: 2300mAh
Voltage: 7.4
No. of Cells: 2
Configuration: 2S2P
MAX Continuous
Discharge Rate:
10C
Weight 3.5oz./100grams
Dimensions:
57mm L 32mm W 32mm H
:
List Price: $39.99
Price: $19.99

2S 2400 Mah Flat Nitro Receiver Lipo Pack
Product ID: 2S2400FL

Details 

Brand New Improved Capacity! IP 2S 2400 mAh 10C "flat" style receiver battery pack has a semi hard plastic sleeve to help reduce the chance of crash damage. Made with super thick 20awg silicone wire and your choice of a red 2 pin JST plug (shown in Square pack photo below) or a black universal style plug (see flat pack photo shown). This light weight Li-Poly battery is designed to power the electronics of most 1/10th or 1/8th scale nitro powered race cars using a ""flat"" style receiver pack. The weight of your race car will be significantly reduced over the typical NiMh receiver packs. The battery voltage to your receiver and servos will remain constant throughout the race. Due to the higher voltage of A Lipo battery, a voltage regulator may be required.
Why must Li-Poly receiver packs be used with a voltage regulator? Although the Li-Poly battery pack’s nominal voltage is 7.4V, when it is fully charged the voltage output is 8.4V. The 8.4V output exceeds the safety level of many receivers and servos on the market, so it is YOUR responsibility to check with the radio and servo manufacturer(s) to make sure you do not need a voltage regulator with these Li-Po receiver packs!
IMPORTANT: 1) Use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) 2) Do not over discharge the Li-Poly battery pack! 3) Read all instructions carefully before using this battery.
Specifications:
* Connector: JR Style with thick 20AWG Silicone Wire
* Balancer Plug: XH style
* Recommended Application: 1/10th & 1/8th scale vehicles that normally use a 5 cell "square" style receiver battery. Please check the dimensions of your battery compartment to verify that this pack will fit.

Type: Lipo
Capacity: 2300mAh
Voltage: 7.4
No. of Cells: 2
Configuration: 2S2P
MAX Continuous
Discharge Rate:
10C
Weight 3.5oz./100grams
Dimensions:
87mm L 32mm W 17mm H
List Price: $44.99
Price: $21.99

2s 3500 mah 90c Hard Case Lipo Pack
Product ID: 2S350090C

Details 

SALE! (V9) Lipo's from IP. IP already sets the standard for Li-po performance and they just upped the ante once again. These packs have an incredible 90C constant 180C burst rate and 3500 mah capacity! This pack can be charged at up to 5C! A set of 4mm high current low profile banana plugs are included! Please check pack size for proper fit.


ROAR APPROVED


Type: Lipo
Capacity: 3500mAh
Voltage: 7.4
No. of Cells: 2
Configuration: 2S1P
MAX Continuous
Discharge Rate:
90C
Weight 5.6oz./158 grams
Dimensions:
93.3mm L 47mm W 19mm H
Price: $41.99

2s 4800 mah 90c Hard Case "Shorty" Lipo Pack
Product ID: 2S480090C

Details 

Intellect sets the standard for Li-po performance with their new (V9) hybrid Lipo Packs. These packs have an incredible 90C constant 180C burst rate! With 4800 mah of rated discharge capacity you'll never worry about not finishing a race again. The internal resistance of these packs average a mere 2.7 milliohms per cell! This means more punch and less heat. This pack can be charged at up to 5C! It comes with a 5mm 10 gauge wire harness with XH balance plug and your choice of connector. An extra set of 5mm high current low profile banana plugs are also included!

We also sell a 5mm male to 4mm female adapter (item #6005) for those racers who do not wish to change their current 4mm male plugs.


ROAR APPROVED


Type: Lipo
Capacity: 4800mAh
Voltage: 7.4
No. of Cells: 2
Configuration: 2S2P
MAX Continuous
Discharge Rate:
90C
Weight 7.8oz./218 grams
Dimensions:
96mm L 47mm W 25.1mm H
:
Price: $62.99

2s 5200 mah 30c Hardwired hard Case Lipo Pack
Product ID: 2S520030C

Details 

Pro-Match 2S 5200mah capacity 30C constant 60C burst rate hard case Li-po pack. 2C max charge rate. Note: This pack comes hardwired with XH balance plug and your choice of female connector. Great practice packs or for those racers on a budget.

ROAR APPROVAL PENDING

Type: Lipo
Capacity: 5200mAh
Voltage: 7.4
No. of Cells: 2
Configuration: 2S2P
MAX Continuous
Discharge Rate:
30C
Weight (total w/ plug) 10.9oz./305grams
Dimensions:
138mm Length(ea) 47mm Width(ea) 25mm Height(ea)
:
Price: $29.99
Out of Stock

« Previous | 1 | 2 | 3 | »

 
 
     
  Copyright © 1999-2014 Pro-Match Racing Inc. All rights reserved.