Store and charge your Lipo's in our large size heavy duty LIPO-SAFE! Measures 12" by 9" Lipo bags are required by ROAR and are highly recommended for storing your Lipo's. Don't pay $25 to $30 for the same product elsewhere.

Store and charge your Lipo's in our smaller size heavy duty LIPO-SAFE! Measures 8.5" by 7" Lipo bags are required by ROAR and are highly recommended for storing your Lipo's. Don't pay $15 to $25 for the same product elsewhere.

NEW! 1800 MAh 2S 35C soft case Lipo 2 pack set made for the 1/16th Traxxas E-Revo and Slash 4wd vehicles. Made with the highest quality cells and 14 gauge silicone wire. Use with our 1620 series adapter for insane speed or our 1621 parallel adapter for super long run time! Also fits in most 1/18th scale vehicles!

***NEW*** Our newest edition to the Pro-Match line up, great for your 1/16 and 1/18th scale vehicles. Can replace 6 cell 2/3 A NiMh packs. Awesome increase in run time and power. Removable leads.

New! ROAR APPROVED! IP5600 Mah 50C 1S 3.7 volt hard case Lipo pack! Latest Lipo technology This pack can be charged at 2C and has extremely high average voltage and super low internal resistance. Comes with 2 4mm low profile banana plugs.** Add 12 gauge wire and your choice of Deans style, EC3, EC5, or Traxxas style plug for only $1.99 more. * Does not fit chassis that have nubs molded into it so only stick pack style packs fit. ** See photo for banana plug details.

NEW! Brand new 5200 2S 25C continuous 50C burst hard case lipo! Pack comes with 12 gauge wire leads which exit the end of the case (click on photo left and see page 2) and an XH (align) balance plug. Add your choice of Deans style or Traxxas power plug for only $.99 more!

ROAR APPROVED!! Team Edition 5000 mah 50C 2S 7.4v hard case Lipo pack! This pack can be charged at 2C and has extremely high average voltage and super low internal resistance. Pack comes with 12 gauge wire leads which are removable for easy storage and an XH balance plug. Add your choice of Deans style or Traxxas plug for only $.99 more.

NEW! 1800 MAh 2S 35C soft case Lipo made for the 1/18th scale vehicles. Made with the highest quality cells and 14 gauge silicone wire. This battery is the same size as a 6 cell nimh side by side pack.

This Pro-Match Li-Poly 2300mAh receiver battery pack is made with super thick 20awg silicone wire! This super light weight Li-Poly battery is designed to power the electronics of your 1/10th or 1/8th scale gas powered race cars that use a 5 cell flat style receiver pack.

This Pro-Match Li-Poly 2300mAh hump style receiver battery pack is made with super thick 20awg silicone wire! This super light weight Li-Poly battery is designed to power the electronics of your 1/10th or 1/8th scale gas powered race cars that use a 5 cell hump style receiver pack.* Note: This receiver pack does not fit the Hot bodies 1/8th scale receiver boxes.

BLOWOUT SPECIAL!!! 4200 mah Saddle Pack Lipo. 2S 4200 MAH 38C 7.4 volt hard case. These packs can be charged at a 2C rate! The balance tap is a JST XH (align) plug (most popular) with 12 Gauge wires. You can add a deans style ultra plug, Traxxas high current connector, or EC3 plug for just 99 cents more. These batteries can be used in many different vehicles, not just 10th scale 4WD! See photo for example.

New! ROAR APPROVED! IP5600 Mah 50C 2S 7.4 volt hard case Lipo pack! Latest Lipo technology This pack can be charged at 2C and has extremely high average voltage and super low internal resistance. This pack fits in virtually any vehicle that holds a 6 cell sub-c size pack* and comes with 2 4mm low profile banana plugs** and 1 low profile center balance banana plug**. Add 12 gauge wire and balance leads with XH plug and your choice of Deans style, EC3, EC5, or Traxxas style plug for only $1.99 more. * Does not fit chassis that have nubs molded into it so only stick pack style packs fit. ** See photo for banana plug details.

Our 3 cell Lipo may be just what you're looking for. Hard case, 3S 35C 5200mAh, and 11.1 volt.

***BLOWOUT SPECIAL!! Our 3800 mah 40C 4S 14.8v hard case Lipo pack is designed exclusively for the growing 1/8th scale electric class. This pack weighs over 130 grams (4.6 ounces) less than our 5000 4S Lipo. The pack has the same footprint but is also 14 mm shorter in height giving the vehicle a much lower center of gravity. This pack can be charged at 2C and has very high average voltage and super low internal resistance. If you don't need the extra capacity of a 5000 pack, this one will make your car accelerate faster and corner better! Pack comes with 12 gauge wire leads and an XH balance plug. Add your choice of Deans, Traxxas -OR- EC5 plug for only $.99 more. Finally a quality 4S hard case Lipo for well under a hundred bucks!

New! ROAR APPROVED! IP5600 Mah 50C 4S 14.8v hard case Lipo pack! Latest Lipo technology This pack can be charged at 2C and has extremely high average voltage and super low internal resistance. Unique dual slotting in the hard case allows the power wires to exit the side or top of the case! See picture 2. This pack fits in virtually all electric 1/8th scale vehicles designed for 4S packs. Comes with 12 gauge wire and balance leads with an XH style balance plug, Add your choice of Deans style, EC3, EC5, or Traxxas style plug for only $.99 more.

***BLOWOUT SPECIAL!*** Our 5100 mah 40C 4S 14.8v hard case Lipo pack is designed exclusively for the growing 1/8th scale electric class. This pack can be charged at 2C and has extremely high average voltage and super low internal resistance. Pack comes with 12 gauge wire leads and an XH balance plug. Add your choice of Deans, Traxxas -OR- EC5 plug for only $.99 more.